Once if you have selected the most suitable pet door you like, the next task is to ensure that it fits well. Before fitting the actual one, it is ideal to run a trial by using a cardboard with a hole of the size of the flap fixed on to the doorway.
You need to ensure that your pet can comfortably crawl through this to ensure that the flap you are going to fix is ideal. If your choice is a sliding glass door or patio panel pet door, then cut a hole according to the rise from the bottom of the cardboard for trial.
Consider the minimum flap width
For this, you need to get the actual measures of your dog or cat. Ensure that the flap door is going to be at least an inch extra to make things easier for your pet. However, don’t make it extremely large, which may pose security risks also. It is ideal to measure the width between the should blades or hipbones to decide the minimum flap width.
Measuring the height
You need to measure the actual height of the pet by taking the measurement from the floor to the top of the pet’s front shoulder. The door flap should be fixed slightly above this height for easy use.
Check the clearance height
Not just the top height, but you should also take the vital measurement of the clearance height, which is the height from the floor to the chest of your pet. The bottom of the flap door should start slightly below the clearance height.
For wooden and steel pet doors, you can mount the pet doors at any comfortable height for your pets. On using sliding glass panel doors, the distance between the floor level and the flap bottom is considered as the rise measurement, which is fixed height.
Considering future growth
While fixing a pet door, it is also important to keep the future growth potential also in mind. If the door is fixed with the current measures of your pet in mind, then once if it grows, things may be troublesome. It is not feasible to change the door every once in a while as your pet grows. So, ensure that you leave adequate room while fixing the door.
For multiple pets
This is another confusion many people have as a lot of Australian households have more than one pet at home. Ideally, the best solution is to find a door, which fits to the size of the largest of your pet. However, if there are mix of dogs and cats, then you need to take care of the clearance height, sideways width, and other such things before choosing an option.
In any case, if you find it difficult to do the measurements yourself, it is ideal to seek the support of a professional installer to do it properly. Most of the pet door sales outlet offers the service of expert installers. However, You can also do it with the assistance of a local handyman too.